Angle nozzles 45 degrees
Angle nozzles, available with one, two or three 45 degrees exit holes are used for blast cleaning inside tubes or hard to reach surfaces. Angle Nozzles are available in silicon and tungsten carbide. Special custom designs of this nozzle are available for angles between 45 and 135 degrees.
| 10180 | XSCAN-2x1/50 (3.2mm) 1 exit |
| 10190 | XSCAN-2x2/50 (3.2mm) 2 exits |
| 10200 | XSCAN-2x3/50 (3.2mm) 3 exits |
| 10210 | XSCAN-3x1/50 (4.8mm) 1 exit |
| 10220 | XSCAN-3x2/50 (4.8mm) 2 exits |
| 10230 | XSCAN-3x3/50 (4.8mm) 3 exits |
| 10240 | XSCAN-4x1/50 (6.4mm) 1 exit |
| 10250 | XSCAN-4x2/50 (6.4mm) 2 exits |
| 10260 | XSCAN-4x3/50 (6.4mm) 3 exits |
| 10270 | XSCAN-5x1/50 (8.0mm) 1 exit |
| 10280 | XSCAN-5x2/50 (8.0mm) 2 exits |
| 10290 | XSCAN-5x3/50 (8.0mm) 3 exits |
| 10300 | XSCAN-6x1/50 (9.5mm) 1 exit |
| 10310 | XSCAN-6x2/50 (9.5mm) 2 exits |
| 10320 | XSCAN-6x3/50 (9.5mm) 3 exits |
| 12110 | XTCAN-2x1/50 (3.2mm) 1 exit |
| 12120 | XTCAN-2x2/50 (3.2mm) 2 exits |
| 12130 | XTCAN-2x3/50 (3.2mm) 3 exits |
| 12140 | XTCAN-3x1/50 (4.8mm) 1 exit |
| 12150 | XTCAN-3x2/50 (4.8mm) 2 exits |
| 12160 | XTCAN-3x3/50 (4.8mm) 3 exits |
| 12170 | XTCAN-4x1/50 (6.4mm) 1 exit |
| 12180 | XTCAN-4x2/50 (6.4mm) 2 exits |
| 12190 | XTCAN-4x3/50 (6.4mm) 3 exits |
| 12200 | XTCAN-5x1/50 (8.0mm) 1 exit |
| 12210 | XTCAN-5x2/50 (8.0mm) 2 exits |
| 12220 | XTCAN-5x3/50 (8.0mm) 3 exits |
| 12230 | XTCAN-6x1/50 (9.5mm) 1 exit |
| 12240 | XTCAN-6x2/50 (9.5mm) 2 exits |
| 12250 | XTCAN-6x3/50 (9.5mm) 3 exits |
